About NanoCeram® Filters
NanoCeram® patented filter media features a thermally bonded blend of microglass fibers & cellulose infused with nanoalumina fibers in a non-woven matrix that created an electropositively charged depth filter media. When assembled into a pleated cartridge, all NanoCeram® filter offerings provide a unique combination of efficiency, capacity, flow rate & low pressure drop at levels unmatched in today’s filtration marketplace. In addition, all NanoCeram® filter cartridges are assembled using only FDA-compliant materials.
All cartridges are engineered and designed to satisfy the most difficult requirements in water treatment. By using the scientific principled of electropositive attraction/capture, Nanoceram®’s NASA-derived technology leads to a rapid and highly efficient adsorption of virtually all particle size. NanoCeram®’s media has a high capacity for particles as large as tens of microns or as small as a few nanometers. Each NanoCeram® filter cartridge exhibits a rating of 0.2µ – a rating typically associated with microporous membranes. Yet NanoCeram® flow rates are hundreds of times greater than such membranes.
DEAL® is a patented process product where by DE (diatomaceous earth) is coated with aluminum oxide-hydroxide (AlOOH). DEAL® is highly electropositive (up to +80 mV), while bare DE is highly electronegative *-70mV). The Strong electropositive forces attract and retain colloidal particles that are instrinsically electronegative in water.
DEAL® is a functionalized/improved form of DE. DE has been used extensively to purify swimming pools, as well as industrial and municipal plants. A precoat filter bed of DE, generally 3 mm thick, is first formed and then additional DE is added to body fluid. When the pressure drop exceeds specification, the DE bed, with contaminants, is internally back washed and discarded. DE has limited efficiency for removing bacteria, virus and colloids, and no capability of removing arsenic or lead.
About CoolBlue® Systems
NanoCeram Argonide’s CoolBlue® Systems offer true microbiological purifier performance in a simple three-stage design. Our system incorporated three distinct advanced technologies, are simple to install and operate and meet the USEPA’s Guide Standard for Microbiological Purifiers as tested / certified by the International Association of Plumbing and Mechanical Officials (IAPMO).
Argonide can assist you in your efforts to enhance your existing system’s capabilities by incorporating NanoCeram technology or we can work with you during the initial stages of system specification development on new systems. LEARN MORE